John Deere 450DLC — Information Controller (ICF) Recorded Data

TM2361 (24JUN08) 9015-20-88 450DLC Excavator Operation and Tests 062608 PN=578 References Item Details Date Date of daily report data. Start Time Time when key switch is first turned ON during daily operation. (Recorded by key switch ON signal.) Stop Time Time when key switch is last turned OFF during daily operation. (Recorded by key switch ON signal.) Level of fuel at the end of daily operation. (Recorded by the fuel sensor from the Fuel Level monitor.) Fuel Usage Amount of fuel used during a day. (Calculated from Engine Control Unit (ECU)) Machine Hour Meter Cumulative machine hours. (Recorded from hour meter on monitor.) HP Mode Hours Hours operated in HP mode per day.

(Recorded from power mode switch information from Main Controller (MCF)) Engine Operating Hours P Mode Hours Hours operated in P mode per day. (Recorded from power mode switch information from Main Controller (MCF)) E Mode Hours Hours operated in E mode per day. (Recorded from power mode switch information from Main Controller (MCF)) Hours operated with auto-idle switch ON per day. (Recorded from auto-idle switch Auto-Idle Switch ON Time information from Main Controller (MCF)) Travel Operating Hours Fast Travel Hours Hours operated in fast travel mode per day.

(Recorded from travel speed switch information from Main Controller (MCF)) 9015 20 88 Slow Travel Hours Hours operated in slow travel mode per day. (Recorded from travel speed switch information from Main Controller (MCF)) Hours operated swinging per day. (Recorded from swing pressure sensor Swing Operating Hours information from the Main Controller (MCF)) Hours operated digging per day. (Recorded from front attachment information from Digging Operating Hours the Main Controller (MCF)) Breaker Operating Hours Hours operated with breaker selected per day. (Recorded from attachment information from Main Controller (MCF)) Secondary Crusher Hours operated with secondary crusher selected per day.

(Recorded from Operating Hours attachment information from Main Controller (MCF)) Attachment Operating Primary Crusher Operating Hours operated with primary crusher selected per day. (Recorded from attachment Hours Hours information from Main Controller (MCF)) Vibrating Hammer Hours operated with vibrating hammer selected per day. (Recorded from Operating Hours attachment information from Main Controller (MCF)) Bucket Operating Hours Hours operated with bucket selected per day. (Recorded from attachment information from Main Controller (MCF)) Hours machine is not operated per day.

(Recorded from all pressure sensors from No Load Time Main Controller (MCF)) Radiator Coolant Temperature Highest radiator coolant temperature per day. (Recorded from monitor) Hydraulic Oil Temperature Highest hydraulic oil temperature per day. (Recorded from Main Controller (MCF)) Highest intake air temperature per day. (Recorded from Engine Control Unit Intake Air Temperature (ECU)) Operating hour distribution for engine per day. (Recorded when alternator output Engine Operating Hour Distribution Data signal is available for more than 10 min.) Operating hour distribution for machine per day.

(Recorded when operating Loaded Time Distribution Data pressure is continuously detected for more than 5 min. with engine running) Continued on next page LD30992,0000227 –19–25APR06–2/3 Slow Travel Hours Hours operated in slow travel mode per day. (Recorded from travel speed switch information from Main Controller (MCF)) Swing Operating Hours Hours operated swinging per day. (Recorded from swing pressure sensor information from the Main Controller (MCF)) Digging Operating Hours Hours operated digging per day. (Recorded from front attachment information from the Main Controller (MCF)) Breaker Operating Hours Hours operated with breaker selected per day.

(Recorded from attachment information from Main Controller (MCF)) Secondary Crusher Operating Hours Hours operated with secondary crusher selected per day. (Recorded from attachment information from Main Controller (MCF)) Attachment Operating Hours Primary Crusher Operating Hours Hours operated with primary crusher selected per day. (Recorded from attachment information from Main Controller (MCF)) Vibrating Hammer Operating Hours Hours operated with vibrating hammer selected per day. (Recorded from attachment information from Main Controller (MCF)) Bucket Operating Hours Hours operated with bucket selected per day.

(Recorded from attachment information from Main Controller (MCF)) No Load Time Hours machine is not operated per day. (Recorded from all pressure sensors from Main Controller (MCF)) Radiator Coolant Temperature Highest radiator coolant temperature per day. (Recorded from monitor) Hydraulic Oil Temperature Highest hydraulic oil temperature per day. (Recorded from Main Controller (MCF)) Intake Air Temperature Highest intake air temperature per day. (Recorded from Engine Control Unit (ECU)) Engine Operating Hour Distribution Data Operating hour distribution for engine per day.

(Recorded when alternator output signal is available for more than 10 min.) Loaded Time Distribution Data Operating hour distribution for machine per day. (Recorded when operating pressure is continuously detected for more than 5 min. with engine running)