John Deere 450DLC — Battery Remove and Install

TM2361 (24JUN08) 9015-20-107 450DLC Excavator Operation and Tests 062608 PN=597 References 2. Remove cap screws (2). 3. Remove battery brackets (1). 4. Disconnect negative (-) battery cable (4). 5. Disconnect positive (+) battery cable (5). 6. Disconnect jumper cable (3). CAUTION: Heavy component; use a hoist. Specification –UN–28APR06 Battery—Weight............................................................ 41 kg approximate 90 lb approximate 7. Remove batteries. TX1005247A 8. Check cables and clamps for wear or corrosion. Make sure batteries are fully charged. Batteries IMPORTANT: If one battery in a 24-volt system has 1—Cap Screw (2 used) failed, replace both batteries.

2—Battery Hold Down Bracket (2 used) 3—Jumper Cable 9. Install batteries. 4—Negative (-) Battery Cable 5—Positive (+) Battery Cable 10. Connect jumper cable (3). 11. Connect positive (+) battery cable (5). 12. Connect negative (-) battery cable (4). 13. Install battery hold down brackets (2). 14. Install cap screws (1) and tighten. AH91621,00002A5 –19–28APR06–2/2 9015 20 ,107