References Switch Panel Remove and Install 1. Lift pilot control lever boot (2) and remove screws and spacers (3). 2. Pull up pilot control lever boot and console cover. TX1005211A –UN–27MAR06 1—Switch Panel 2—Pilot Control Lever Boot 3—Screw and Spacer (4 used) 4—Console Cover Pilot Control Lever Boot LD30992,0000432 –19–23MAR06–1/3 TM2361 (24JUN08) 9015-20-115 450DLC Excavator Operation and Tests 062608 PN=605 3. Remove plugs and screws (5) and remove cap screws (6). 4. Pull switch panel assembly forward and gently tilt back. Disconnect harness connector to key switch.
–UN–27MAR06 5—Plug and Screw (2 used) 6—Cap Screw (2 used) TX1005212A Switch Panel Cap Screws Continued on next page LD30992,0000432 –19–23MAR06–2/3 9015 20 ,115