John Deere 450DLC — Replace CINCH™ Connectors

3. Remove secondary lock (3). 3—Secondary Lock T132301B –UN–29JUN00 Continued on next page LD30992,0000244 –19–31MAR06–2/3 TM2361 (24JUN08) 9015-20-126 450DLC Excavator Operation and Tests 062608 PN=616 References Replace CINCH Connectors 1. Remove extraction tool (1) from the loading side of connector. 2. Insert blade of extraction tool into locking tabs (2) of secondary lock (3). Rotate tool away from the connector to pry one side of the secondary lock out of the locked position. Repeat this step for the other locking tab. NOTE:

After unlocking one side of the secondary lock, a screw driver or similar device may need to be used to hold it in the unlocked position while –UN–29JUN00 unlocking the second locking tab. 1—Extraction Tool 2—Secondary Lock Locking Tabs T132105B 3—Secondary Lock 9015 20 ,126 CINCH is a trademark of the Cinch Co. LD30992,0000244 –19–31MAR06–1/3