John Deere 450DLC — Fan Drive System Diagram and Operation

TM2361 (24JUN08) 9025-05-3 450DLC Excavator Operation and Tests 062608 PN=641 Theory of Operation 15—Pump 1 46—Pump Case Drain Filter 84—Left Control Valve 137—Auxiliary Spool 16—Pump 2 and Bypass Valve (5-spool side) 140—Left Travel Spool 26—Charge Pump 47—Hydraulic Oil Tank 90—Right Travel Spool 149—Swing Motor (2 used) 27—Pilot Pump 48—Return Filter Element 94—Bucket Spool 157—Left Travel Motor 28—Fan Drive Pump 50—Suction Screen 99—Boom 1 Spool 159—Right Travel Motor 36—Fan Drive Motor 51—Pilot Filter and Pressure 107—Arm 2 Spool 168—Boom Cylinder (2 used) 43—Hydraulic Oil Cooler Regulating Valve 113—Swing Spool 169—Arm Cylinder 44—Restriction Valve 83—Right Control Valve 118—Arm 1 Spool 170—Bucket Cylinder 45—Hydraulic Oil Cooler (4-spool side) 126—Boom 2 Spool Bypass Valve The main hydraulic system is an open-center hydraulic of oil to ensure oil flows from the tank, through the system.

suction line, and into the pumps. Hydraulic oil flows from the hydraulic oil tank (47) Return oil from the motor(s) and cylinder(s) is routed through the suction screen (50) to the charge pump into the return passages in the control valve by the (26), hydraulic pump 1 (15), hydraulic pump 2 (16), valve spools. From the return passages, return oil and the fan pump (28). Hydraulic pump 1 delivers flows out of the control valve, through the restriction supply oil to the right control valve (83) (4-spool side) valve (44), oil cooler (43), and return filter (48). and hydraulic pump 2 delivers supply oil to the left control valve (84) (5-spool side).

Oil travels from the If the oil is cold (high viscosity), or there is a surge of fan pump (28) and turns the fan motor (36). Supply oil return oil, or the hydraulic oil cooler becomes plugged, is routed to the left and right travel motors (157 and the hydraulic oil cooler bypass valve (45) routes return 159), cylinders (168—170) and both swing motors oil around the hydraulic oil cooler and directly to the (149) by the valve spool(s) of their respective valve hydraulic tank (47) when oil flow resistance becomes section (90, 94, 99, 107, 113, 118, 126, 137, and 140). too high through the hydraulic cooler.

The hydraulic oil tank is pressurized to create a head LD30992,000024E –19–25APR06–2/2 9025 05 3 Fan Drive System Diagram and Operation Information not available at the time of release. OUT3035,000001A –19–08JUN06–1/1