TM2361 (24JUN08) 9025-05-41 450DLC Excavator Operation and Tests 062608 PN=679 Theory of Operation 27—Pilot Pump 36—To Fan Drive Motor 207—Outer Spring 215—Spring 28—Fan Pump 200—Lever 208—Compensating Rod 216—Pin 30—Servo Piston 201—Pin 209—Pin 217—Solenoid Valve Spool 31—Feedback Link 202—Pin 210—Pin 218—Supply Oil 32—Load Sleeve 203—Pin 211—Large Chamber 219—Pilot Oil 33—Load Spool 204—Hole 212—Lever Y14—Pump Control Solenoid 34—Pilot Piston 205—Inner Spring 213—Pin Valve 35—Compensating Piston 206—Small Chamber 214—Hole Regulator Control by Pilot Control Pressure (30).
With supply oil being routed to both ends of the (Decreasing Flow Rate)—When fan drive pump servo piston, the servo piston will move to the right, control solenoid valve (Y14) is actuated, pilot oil (219) due to the larger surface area of the large chamber as regulated by the solenoid valve, is routed to the side. When the servo piston moves to the right, the pilot piston (34). When the pilot oil pressure increases feedback link (31) will rotate counterclockwise around beyond the force of the spring (215), the pilot piston the pin (203), in turn moving the load spool (33) to the will move to the right, in turn pushing the lever (212) to left.
the right (counterclockwise) around the pin (213). The servo piston will continue to move to the right until The pin (203), which is attached to the feedback link the oil passages on the load spool and the load sleeve (31), pulls the feedback link and the load spool (33) to (32) are completely closed. With the servo piston in the right, as the feedback link pivots clockwise around this position, the pump swash plate will move to the pin (210). minimum displacement in response to the increase of pilot control pressure at the pilot piston (34).
With the load spool in this position, supply oil (218) is routed to the large chamber (211) of the servo piston Continued on next page OUT3035,000001D –19–27APR06–3/9 9025 05 41