TM2361 (24JUN08) 9025-05-47 450DLC Excavator Operation and Tests 062608 PN=685 Theory of Operation 27—Pilot Pump 36—To Fan Drive Motor 207—Outer Spring 215—Spring 28—Fan Drive Pump 200—Lever 208—Compensating Rod 216—Pin 30—Servo Piston 201—Pin 209—Pin 217—Solenoid Valve Spool 31—Feedback Link 202—Pin 210—Pin 218—Supply Oil 32—Load Sleeve 203—Pin 211—Large Chamber 219—Pilot Oil 33—Load Spool 204—Hole 212—Lever 220—Return Oil 34—Pilot Piston 205—Inner Spring 213—Pin Y14—Pump Control Solenoid 35—Compensating Piston 206—Small Chamber 214—Hole Valve Regulator Control by Fan Drive Pump Delivery supply oil constantly being routed to the small chamber Pressure (Increasing Flow Rate)—When the fan (206) of the servo piston, the servo piston will now drive pump delivery pressure at the compensating move to the left.
When the servo piston moves to the piston (35) decreases, the force of the inner spring left, the feedback link (31) will rotate clockwise around (205) and the outer spring (207), will move the the pin (203), moving the load spool (33) to the right. compensating rod (208) to the left, in turn moving the lever (200) to the left (clockwise), around the pin (201) The servo piston will continue to move to the left until which is fixed to the housing. the oil passages on the load spool and the load sleeve (32) are completely closed.
With the servo piston in The pin (203), which is attached to the feedback link this position, the pump swash plate will move to (31), pulls the feedback link and the load spool (33) to maximum displacement, increasing the flow rate of the the left, as the feedback link pivots counterclockwise pump. around the pin (210). With the load spool in this position, the large chamber (211) of the servo piston (30) is open to the tank. With OUT3035,000001D –19–27APR06–9/9 9025 05 47