Theory of Operation 15—Pump 1 90—Right Travel Spool 113—Swing Spool 168—Boom Cylinder (2 used) 16—Pump 2 94—Bucket Spool 118—Arm 1 Spool 170—Bucket Cylinder 44—Restriction Valve 99—Boom 1 Spool 126—Boom 2 Spool 169—Arm Cylinder 45—Oil Cooler Bypass Valve 107—Arm 2 Spool 137—Auxiliary Spool 180—Neutral and Power 83—Right Control Valve 110—Bypass Shutoff (auxiliary 140—Left Travel Spool Passages (4-spool) flow combiner) Valve 149—Swing Motor 183—Combiner Passage 84—Left Control Valve 111—Arm Regenerative 157—Left Travel Motor 184—Return Passage (5-spool) Valve—Switch Valve 158—Right Travel Motor Supply oil from pump 1 (15) flows to the right control valve (83).
Supply oil from pump 2 (16) flows to the left control valve (84). When all functions are in neutral, supply oil flows through the neutral and power passages (180) for each valve spool section and then into the return passage (184). Neutral and power passages in the left and right control valves are used to route supply oil for the combined operation of functions. Arm 1 and 2 spools (107 and 118), and the boom 1 and 2 spools (99 and 126), are connected by combiner passages (183) so supply oil from both pump 1 and pump 2 flows to the cylinders during a single operation.
Supply oil from pump 2 can be combined with supply oil from pump 1 by the auxiliary combiner power passage to supply the auxiliary spool (137). MM61211,0001522 –19–15MAY08–9/15 TM2361 (24JUN08) 9025-05-55 450DLC Excavator Operation and Tests 062608 PN=693 –UN–17APR06 TX1006460 Right and Left Travel Valve Cross Sections 85—Main Relief and Power 88—Check Valve 146—Bypass Shutoff (bucket 157—Left Travel Spool Digging Valve 89—Travel Flow Combiner flow combiner) Valve 159—Right Travel Spool 86—Main Relief Valve Isolation Valve (5-spool) Check Valve (4-spool) 141—Neutral Passage Check Valve (left travel lift check) Continued on next page MM61211,0001522 –19–15MAY08–10/15 9025 05 55