TM2361 (24JUN08) 9025-05-75 450DLC Excavator Operation and Tests 062608 PN=713 Theory of Operation 15—Pump 1 88—Check Valve—Travel Flow 118—Arm 1 Spool 157—Left Travel Motor 16—Pump 2 Combiner Valve Circuit 140—Left Travel Spool 159—Right Travel Motor 83—Right Control Valve 89—Travel Flow Combiner 142—Check Valve (lift 169—Arm Cylinder (4-spool) Valve check)—Bucket 180—Supply Oil 84—Left Control Valve 90—Right Travel Spool 143—Orifice—Bucket Power 182—Pilot Oil (5-spool) 94—Bucket Spool Passage 184—Return Oil 85—Main Relief and Power 107—Arm 2 Spool Digging Valve When travel only is actuated, supply oil (180) from Supply oil (180) from pump 1 (15) flows to right travel pump 2 (16) flows through the neutral passage of arm spool and now through the travel flow combiner valve 1 (118), boom 2, and auxiliary spools, then through the to the left travel spool and bucket spool (90).
Supply left travel spool (140) and out to the left travel motor oil flow from pump 1 to both left and right travel motors (157). Supply oil from pump 1 (15) flows through the prevents mistracking. right travel spool (90) and out to the right travel motor (159). Right travel spool blocks the flow of supply oil When travel is not actuated, return oil and spring force through the neutral passage of bucket (94), boom 1, keep the travel flow combiner valve closed. and arm 2.
Supply oil from pump 2 (16) is used for the swing, When dig functions are actuated at the same time as arm, and boom functions and, when connected, the travel, the travel flow combiner valve (89) is shifted by auxiliary function. pilot oil from the travel flow combiner pilot valve (port SL) in the pilot signal manifold. See Pilot Signal Manifold Operation for operation of pilot valves. (Group 9025-05.) Continued on next page MM61211,0001531 –19–15MAY08–2/3 9025 05 75