Theory of Operation Boom and Arm Reduced Leakage Valves Operation Reduced leakage valves are used in the boom head end circuit and arm rod end circuit. The function of a reduced leakage valve is to reduce cylinder drift by stopping leakage from the cylinder back through the control valve.
LD30992,0000262 –19–26APR06–1/5 TM2361 (24JUN08) 9025-05-83 450DLC Excavator Operation and Tests 062608 PN=721 97 98 99 168 102 180 –UN–03MAR06 182 183 TX1004038 184 103 TX1004038 Neutral Schematic 97—Boom Flow Rate Control 99—Boom 1 Spool 103—Boom 1 Reduced 180—Supply Oil Valve—Switch Valve 102—Boom 1 Reduced Leakage Valve—Poppet 182—Pilot Oil 98—Boom Flow Rate Control Leakage Valve—Switch Valve 183—Trapped Oil Valve—Poppet Valve Valve 168—Boom Cylinder (2 used) 184—Return Oil NOTE: The operational principles of the boom and cylinders is applied to the spring end of boom reduced arm reduced leakage valves are identical.
leakage valve—poppet valve (102) through the boom Therefore, boom reduced leakage valve reduced leakage valve—switch valve (102). The check operation is used as an example. valve is held closed against the seat in housing, trapping the oil from the cylinders at the work port. Neutral Position—When the control valve is in neutral, the oil pressure generated by the load on the Continued on next page LD30992,0000262 –19–26APR06–2/5 9025 05 83 97 98