TM2361 (24JUN08) 9025-05-91 450DLC Excavator Operation and Tests 062608 PN=729 Theory of Operation Y24 Y23 20 16 Y22 Y25 23 16 22 19 21 22 17 –UN–06FEB06 24 25 20 18 26 T216853 21 T216853 19 Boom Flow Rate Solenoid Valve, (port SF) Y22—Boom Flow Rate Y25—Travel Speed Solenoid 20—Boom Flow Rate Control 24—Pilot Oil Solenoid Valve, (port SF) Valve (port SI) Valve—Switch Valve 25—Reduced Pilot Oil Y23—Boom Mode Solenoid 16—Solenoid Coil 21—To Hydraulic Oil Tank 26—Return Oil Valve (port SC) 17—Adjusting Screw 22—Spool Y24—Power Digging Solenoid 18—Nut 23—Pressure Equals Magnetic Valve (port SG) 19—From Pilot Shutoff Force Solenoid Valve Boom Flow Rate Solenoid Valve, (port SF) reduced pilot oil (25) is sent to the boom flow rate Operation— Boom flow rate solenoid valve (Y22) is a control valve—switch valve (20).
The pressure of proportional solenoid valve type. The solenoid valve is reduced pilot oil is in proportion to the electrical signal activated by an electrical signal from the main to the solenoid coil. controller (MCF). The electrical signal is DC voltage that is turned on and off to form a pulse-width De-energized—When de-energized, the spool is modulated signal. Solenoid coil (16) reacts to the pushed to the right by a spring. The boom flow rate average voltage to create a magnetic force to shift the control valve—switch valve is then connected to the spool (22) left against a spring. When shifted left, hydraulic oil tank (21) through the spool.
Continued on next page LD30992,0000263 –19–26APR06–6/7 9025 05 91