John Deere 450DLC — Swing Motor and Park Brake Circuit Operation

TM2361 (24JUN08) 9025-05-100 450DLC Excavator Operation and Tests 062608 PN=738 Theory of Operation –UN–25APR06 TX1006742 1—Spring 6—Plate 10—Swash Plate 14—Valve Plate 2—Brake Piston 7—Friction Plate 11—Slipper 15—Cover 4—Port SH (Brake Release 8—Swash Plate Piston 12—Housing 150—Crossover Relief Valve Pressure) 9—Shaft 13—Cylinder Block Swing Motor—The swing motor is a fixed the cylinder block (13) which the swash plate piston (8) 9025 05 ,100 displacement axial piston motor. is inserted. When pressure oil is applied from the pumps, the swash plate piston (8) is pushed.

Slipper The swing motor components consists of the swash (11) at the top of swash plate piston slides over swash plate piston (8), swash plate (10), cylinder block (13), plate (10) so that swash plate piston rotates. The top valve plate (14), and a housing (12). The park brake of shaft (9) is splined to the first stage sun gear of components are; springs (1), brake piston (2), plates swing gearbox. Therefore, the rotation of shaft (9) is (6) and friction plates (7). The Shaft (9) is splined to transmitted to the swing gearbox. Continued on next page MM61211,0001539 –19–26APR06–2/4