John Deere 450DLC — Travel Motor and Park Brake Circuit Operation

TM2361 (24JUN08) 9025-05-105 450DLC Excavator Operation and Tests 062608 PN=743 Theory of Operation Travel Motor and Park Brake Circuit Operation –UN–25APR06 TX1006976 Travel Motor 1—Brake Spring 5—Swashplate Piston 8—Output Shaft 11—Piston 2—Brake Piston 6—Retainer 9—Spring 12—Cylinder Block 3—Travel Park Brake 7—Ball Guide 10—Slipper 13—Valve Plate 4—Swashplate Travel Motor Components—The travel motor is a two their bores. The pistons in the other half of the cylinder speed, axial piston, swash plate type motor which block move back into their bores to discharge oil. includes the park brake.

The cylinder block is preloaded against the valve plate The travel motor and park brake valve assembly is by springs (9), ball guide (7) and retainer (6) to prevent composed of counterbalance valve, crossover relief leakage during starting or low pressure operation. As valves, speed selector valve, and check valves. pressure in the cylinder block bores increase, the force holding the cylinder block against the valve plate and Pressure oil flows through valve plate (13) forcing the pistons also increase. pistons against the angled swashplate (4) in one half of the cylinder block (12).

Because the swashplate is Pressure oil flows through the center of each piston to fixed, the piston slippers slide down the angled face the balljoint and to the face of each slipper for turning the cylinder block and output shaft (8). The lubrication. valve plate (13) is held stationary by a pin. Retainer (6) holds the slippers against the swash plate by force Swashplate pistons (5) control the angle of the from ball guide (7) and springs (9). As the cylinder swashplate (4) to change motor displacement. block and output shaft rotate, the pistons move out of Continued on next page LD30992,0000269 –19–25APR06–1/2 9025 05 ,105