TM2361 (24JUN08) 9025-25-12 450DLC Excavator Operation and Tests 062608 PN=872 Tests 1. Connect one of the following test equipment to perform Monitoring test: Pump 1 Delivery Pressure 0.00 MPa Pump 2 Delivery Pressure 0.00MPa 1. SERVICE ADVISOR application. See SERVICE Hydraulic Oil Temperature 0 oC ADVISOR Connection Procedure for instruction. Actual Engine Speed --------min-1 (Group 9015-20.) –19–03MAR06 Access Control Valve Spool Actuating Pilot ON Pressure Test. 1 2 3 4 5 Or select the following items from the menu: • Arm In Pilot Pressure 6 7 8 9 0 TX1003295 F1 F2 F3 F4 • Hydraulic Oil Temperature • Actual Engine Speed Monitor 2.
See Personal Digital Assistant (PDA) Connection To Excavator Using Dr. ZX Application for instruction. (Group 9015-20.) Select the following items from the Monitor Display: • Arm In Pilot Pressure • Hydraulic Oil Temperature • Actual Engine Speed 3. See Monitor Service Menu Operation for instruction to actuate the service menu on monitor in cab. (Group 9015-16.) Select the following items from Monitoring list: • Arm In Pilot Pressure • Hydraulic Oil Temperature –UN–07JAN06 • Actual Engine Speed 4. Push the pressure release button on top of hydraulic oil tank to relieve pressure. 02098A Remove pilot line of choice at control valve end 9025 25 12 cap.
TX10 Install 203836 tee in pilot line for function being Control Valve Spool Actuating Pilot Pressure Test tested. Connect the JT02156A Digital 1—Tee Pressure/Temperature Analyzer and JT02162 35 2—Transducer 000 kPa (350 bar) (5000 psi) transducer or a 7000 kPa (70 bar) (1000 psi) gauge.See JT02156A Digital Pressure /Temperature Analyzer Installation. (Group 9025-25. SERVICE ADVISOR is a trademark of Deere & Company Continued on next page MS12501,0000096 –19–05JUN06–2/3