TM2361 (24JUN08) 9025-25-53 450DLC Excavator Operation and Tests 062608 PN=913 Tests 1. SERVICE ADVISOR application. See SERVICE ADVISOR Connection Procedure for instruction. (Group 9015-20.) Access Swing Motor Crossover Relief Valve Test. Or select the following items from the menu: • Pump 1 Delivery Pressure • Pump 2 Delivery Pressure • Hydraulic Oil Temperature • Actual Engine Speed 2. See Personal Digital Assistant (PDA) Connection To Excavator Using Dr. ZX Application for instruction. (Group 9015-20.) Select the following items from the Monitor Display: • Pump 1 Delivery Pressure • Pump 2 Delivery Pressure • Hydraulic Oil Temperature • Actual Engine Speed 3.
See Monitor Service Menu Operation for instruction to actuate the service menu on monitor in cab. (Group 9015-16.) Select the following items from Monitoring list: • Pump 1 Delivery Pressure • Pump 2 Delivery Pressure • Hydraulic Oil Temperature • Actual Engine Speed Push the pressure release button on top of the hydraulic oil tank to relieve pressure. Install 4200465 adapter into test port (1) on pump two. Connect the JT02156A Digital Pressure/Temperature Analyzer and JT02160 Transducer or a 70 000 kPa (700 bar) (10,000 psi) gauge. See JT02156A Digital Pressure/Temperature Analyzer Installation for instruction. 2. Warm hydraulic oil to specification. See Hydraulic Oil Warm-Up Procedure.
(Group 9025-25.) SERVICE ADVISOR is a trademark of Deere & Company Continued on next page TX04577,00000ED –19–05JUN06–2/4 9025 25 53