TM2361 (24JUN08) 9025-25-55 450DLC Excavator Operation and Tests 062608 PN=915 Tests 6. If adjustment is required loosen lock nut (6) on swing 3 relief valve (5). Turning in increases pressure and out decreases pressure. 2 Specification Swing Relief Valve Adjustment— –UN–04APR06 Pressure Change...................................10 MPa approximate per 1/4 turn 10 000 kPa approximate per 1/4 turn 100 bar approximate per 1/4 turn....... 1451 psi approximate per 1/4 turn 4 TX1005796 7. Tighten plug (1) to specification. 1 Specification Crossover Relief Valve Locations Crossover Relief Valve Lock Nut—Torque.................................................................................
118 N•m 90 lb-ft 8. Actuate the swing function over relief to check adjustment. 1—Left Swing Crossover Relief Valve—Left Swing Motor 2—Right Swing Crossover Relief Valve—Left Swing Motor 3—Left Swing Crossover Relief Valve—Right Swing –UN–04APR06 Motor 4—Right Swing Crossover Relief Valve—Right Swing Motor 5—Swing Crossover Relief Valve 6—Lock Nut TX1005797 Crossover Relief Valve Cross Section TX04577,00000ED –19–05JUN06–4/4 9025 25 55