John Deere 450DLC — Travel Motor Crossover Relief Valve Test and Adjustment

Tests 4. Install round bar stock (1) between the sprockets and track frames to stall travel motors. 5. Run machine at specification. Specification Hydraulic Oil—Temperature 45—55 ° C ........................................................ 110—130 ° F Engine—Speed 1300 rpm approximate ...................................................... Work Mode Switch—Position Dig Mode ...................................................... Power Mode Switch—Position HP (High Power) Mode .............................. Auto Idle Switch—Position Off .................................................................... TX1006119 –UN–11APR06 6.

Hold power dig switch and slowly actuate the travel function for the crossover relief valve being checked. Round Bar Stock 1—Round Bar Stock Record the pressure reading. Specification Travel Motor Crossover Relief Valve—Pressure 32.8—35.3 MPa ............................................................... 32 800—35 300 kPa 328—353 bar 4760—5120 psi Continued on next page TX04577,00000F0 –19–05JUN06–3/4 9025 25 58 TM2361 (24JUN08) 9025-25-58 450DLC Excavator Operation and Tests 062608 PN=918