John Deere 450DLC — Air Conditioner and Heater Diagnostic Trouble Code Check

TM2361 (24JUN08) 9031-15-7 450DLC Excavator Operation and Tests 062608 PN=959 Diagnostic Information Air Conditioner and Heater Diagnostic Trouble Code Check Display Diagnostic Trouble Codes Turn key switch on. Press the blower fan OFF switch. Press both “^” and “v” temperature control switches at the same time and hold for 3 seconds. A buzzer will sound after this operation is complete. For a list of air conditioner and heater diagnostic trouble codes, See Air Conditioner Controller (ACF) Diagnostic Trouble Codes.

(Group 9001-40.) Change Displayed Diagnostic Trouble Code In case more than one fault is detected, press either “^” or “v” temperature control switch to display the fault code on the monitor in order. Each time the displayed fault code is changed, a buzzer will sound. Delete Displayed Diagnostic Trouble Code Press and hold both the circulation air switch and the fresh air switch at the same time for more than 3 seconds to delete the displayed diagnostic trouble code. After the diagnostic trouble code is deleted, a buzzer will sound.

After all diagnostic trouble codes have been deleted, the LCD will display “E00.” End Diagnostic Trouble Code Display Press the fan OFF switch to exit the self-diagnostic mode. LD30992,0000497 –19–23MAR06–1/1 9031 15 7