92 TILT STEERING RT70H RT70M RT90H RT90M RT115H 24. 105-1552 4 SCREW (M6-1.00 X 16MM) REF NO. PART NUMBER QTY DESCRIPTION REMARKS 25. 165-817 1 SWITCH GASKET HYDROSTAT UNITS ONLY 26. 105-361 1 JAM NUT (13/16 NF) 27. 106-425 2 (M5-0.80 X 40mm, SOC) 28. 217-710 2 MICRO RELAY (SPDT) 29. 217-826 3 MINI RELAY (SPDT) 30. 318-560 2 ACCESS DOOR 1 W/ POWERSHIFT UNITS 31. 106-049 6 BOLT (#10-24 X 3/4", PLPS) 32. 107-744 2 WASHER (M6) 33. 106-048 8 LOCKNUT (#10-24) 34. 106-574 2 CLIP NUT (M6-1.00) 35. 308-888 1 CUP HOLDER 37. 110-208 1 LEVEL INDICATOR 38. 116-525 1 BUMPER 36. 107-801 18 WASHER (M6) 40. 107-800 2 WING SCREW (M6-1 X 25mm) 39.
106-252 2 JAM NUT (5/16-NC) USE 1 @ 25" NOT USED ON POWER SHIFT UNITS NOT USED ON POWER SHIFT UNITS NOT USED ON POWER SHIFT UNITS 46. 105-185 2 BOLT (#10-24 X 1/2 ", RD SLT) 42. 115-686 AR BULK EDGE (5/32",SOLD PER 1") 41. 318-557 1 CONSOLE BASE 44. 106-381 2 FLG LK SCREW (M8-1.25 X 25MM) 43. 314-487 1 BRACE 45. 105-095 2 WASHER (1/4") 47. 220-1241 1 30 PIN CONTROLLER V3 SEE FOOTNOTE 1 48. 106-161 2 FLG SCREW (M6-1.00 X 20MM) SEE FOOTNOTE 1 49. 106-538 2 LOCKNUT (M6-1.00,PRV TRQ,10.9) SEE FOOTNOTE 1 50. 106-386 2 FLG LOCKNUT (M8-1.25) NOT SHOWN: FOOTNOTES: 1. USED WITH REAR STEER OPTION OR REAR STEER AND CRUISE CONTROL OPTION WHEN UPDATED WITH THE REAR STEER KITS 190-1437 OR 190-1438.
CRUISE ONLY OPTION USES MODULE 220-569 @ 1X, BOLTS 105-815 @ 2X, AND NUTS 106-048 @ 2X. NOTE: 20 ID0091590