Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION ADJUST SEAT BELT WARNING damaged, replace the seat belt. woven on the reverse side of the belt. Adjust and fasten the seat belt before starting to travel. Always use the seat belt when traveling. Do not use the seat belt with either half of the belt twisted. ADJUST STEERING WHEEL TILT WARNING 3 - 81 Before fitting the seat belt, c heck the belt mounting bracket and sea t belt to check that there is no ab normality. If it is w orn or Even if there appears to be no problem in the seat belt, replace the seat belt once every 3 years. Th e date of manufac ture is Fastening and removing belt s tightly, without being too tight.

s the brake pedal fully, and adjust the s pressed against the backrest. Fit the seat belt so that it fit s tightly, without being too tight. 1. Sit on the seat, depres seat so that your back i 2. Sit in the seat, pull the r (1) into buckle (2) until Fit the belt so that it foll 3. When removing the bel free the belt. 1. Sit on the seat, depres s pressed against the backrest. 2. Sit in the seat, pull the r ight side of the belt, then insert t ongue a click is heard. ows your body and is not twisted. ows your body and is not twiste 3.

When removing the bel t, press the red button in buckle (2) to (2) to Always stop the machine befor e adjusting the tilt of the steering w heel I t is possible to tilt the stee ring wheel to the front or rear and to adjust the height. Pull the le ver up and set the steering whee l to t he desired position, then push the lever down to fix the steering wheel securely in position. t/rear: 80 mm/80 mm (3.2 in/3.2 in) m center of steering wheel) 33 mm (1.3 in) n: 17 mm (0.7 in) Amount of adjustment: Fron t/rear: 80 mm/80 mm (3.2 in/3. 2 in) (fro Up: Dow