. OPERATION OPERATION CANCELING DUMP BODY HOLD CONDITION WARNING STOPPING ENGINE the engine parts will be shortened, so never the parking the HOLD cool down 3 - 87 If the HOLD is canceled w hen the dump body is raised, the b ody will go down under its own weig ht. This is very dangerous. Always lower the dump bo If the engine is stopped , the body will stay in the HOLD condition, regardless of the positi on of the dump lever. If the engine is started in this condition, the dump body pilot lamp will light up. Return the dump contr ol lever to the HOLD position, th en move it t o the FLOAT position t o cancel the dump body HOLD condition.
s set to the FLOAT condition, the body pilot lamp will go out. When the dump body i s set to the FLOAT condition, th e body pilot NOTICE If the engine is suddenl is danger that the life stop the engine sudden Allow the engine to coo Set the dump lever to t stop the engine. 1. Set the gear shift le ver to the N position, then set t brake switch to the 2. Lower the dump b position. 3. Run the engine at gradually. 4. Turn the key of sta rting switch (1) to the OFF positi the engine. 5. Remove the key fro CHECKS AFTER S TOPPING ENGINE 1. Walk around the m and water leakage. 2. Fill the fuel tank. 3. Check the engine c 4. Remove any mud a 1.
Walk around the m achine and check the work equip ment, bodywork, and undercarria ge, and check also for oil ompartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. ffixed to the undercarriage. 2. Fill the fuel tank. 3. Check the engine c ompartment for paper and debri s. Clean ou t any paper and debris 4. Remove any mud a ffixed to the undercarriage.