Komatsu — LOADING OPERATIONS

. OPERATION OPERATION below, use a bulldozer to tow the machine out. 1. Release the accelerator pedal to stop the wheels from spinning. 2. Actuate the inter-axle differential lock. 4. Release the accelerator pedal and brake pedal. LOADING OPERATIONS WARNING Do not load the dump body when the dump body is raised. 3 - 103 WHEN TIRES ARE STU If the wheels get stuck, to stop the wheels from spinning, do as follow ocedure to position "5" and raise the engine speed. sition R1 and raise the engine spee move the machine backwards and fo rwards until it can escape.

When loading large rocks or when using a large-sized loader, i f the lo ad is dumped directly in to the dump b ody, it may result in deformation o f parts of the dump body. To preve nt this, when loading large rocks, first load w ith soil to act as a cushion, then lo ad the large rocks on top of the cushion. Th is will reduce the impac t shock on the dump body. In addition, when loading r ocks that exceed the following conditions, i nstall the optiona l body reinforcement plate.

Rocks with one side ove r 0.3 m (11.8 in) than 4.5 (Mohs scale) ore than 150 kg (331 lb) ingots Rocks of hardness more Rocks with a weight of m When transporting steel NOTICE When traveling, always set the dump lever to the FLOAT position, re gardles s of whether the machine i s loaded or not l oaded. If the dump lever is not at th e FLOAT position and the gear shift lever is not at the N position, the central warning lamp w ill flush and the alarm buzzer will s ound.