. OPERATION OPERATION DUMP OPERATIONS WARNING Always follow the instructions of the signalman when carrying out (1) at the N position, and set parking 3 - 105 When dumping large roc When carrying out insp ks, operate the dump body slowly. ection or maintenance with the dump body ody pivot pin and lock the dump lever at the IVOT PIN (PAGE 3-45)". raised, always use the b HOLD position. For details, see "BODY P Operate the dump body 1. 1. Place gear shift lev brake switch (2) to t 2. Move dump lever (3 ) to the RAISE position, th en depres s the accelerator pedal to raise the dump body.
AISE position, If the dump lever is r eleased when it is at the R sition, it is held at the RAIS E position and the dump bo dy will con tinue to rise. The dumping spee speed. d increases in proportion to the engine 3. When the dump bod y rises to the previously set position, dump lever (3) returns to th e HOLD position. The du mp body is then held at that position. If it is necessary to r aise the dump body further , operate dump lever (3) to the RAIS E position and the dump b ody will ri se. If dump lever (3) is re leased, dump lever (3) w ill return t o the HOLD position and t he dump body will stop at that posit ion.
When raising the du mp body, to prevent any im pact load o n the hydraulic circuit or ho ist cylinder, let the acceler ator pedal back when the dump bod y approaches the maximu m tilt angl e.