Komatsu — CAB TILT OPERATION

. OPERATION OPERATION CAB TILT OPERATION WARNING 3 - 107 To prevent serious injury or death if the cab comes down, al ways obser ve the f ollowing strictly when tilting the cab.

Precautions before performi Perform the cab tilt opera When operating the cab til t, to prevent contact between the cab and bo dy (machine), se t the machine facing directly to the front and secure the front and r ear frames with the articulation Set the parking brake swi tch to the "PARKING" position t o apply the parking brake Lock the dump control lev er with the dump lever lock kno Put blocks under the tires to prevent the machine from m Do not perform the cab til Precautions when performin Do not operate the cab tilt Do not stand under the ca When the cab is tilted up, lock it securely in position with the lock ba While the cab is tilted up, do not ride on or get off it.

While the cab is tilted up, do not operate the gear shift lev er or dump Do not start the engine wh ile the cab is tilted up. If it is nec essary to st art the engine when carrying out inspection, check first that there is no one under Do not subject to the mac hine to any large impact force w hile the cab is tilte d up. When using the tilt cylind er to lower the cab, do not reduc e the hydra ulic pressure suddenly. Adjust t he lowering speed and lower the cab slowly. The lock bar is set on the left inside of the engine hood. A fter using it , be sur e to return it.