. OPERATION TROUBLESHOOTING ACTION CODE stop the machine, apply the parking brake and check the service code, then contact your REMARK 3 - 140 If any problem occur Komatsu distributor f If action code "E03" i s displayed on the character display (1), or if an actio n code is displayed after taking the re medy when action code "E 02" was displayed, or if "MAINTENANCE" is displa yed together with action code "E01", do as follows to check the failure code. 1. If an action code is displayed, pressed the top (>) portion of machine monitor mode selector switch (2) and check the failure code. The failure code is displayed on character display 2.
Press the top (>) portion of machine monitor mode selector switch ( 2) again. The service meter and odometer will be displayed for several seconds, and the screen will then retur If more than one failure has occurred, the next failure code is displa 3. Check the failure code, then contact your Komatsu distributor for re The 6-digit code displayed on the left of the line at the top of the cha The code display ed at the right side of the failure code shows the co ntroller that detected the failure cod MON: Machine m TM: Transmissio ENG: Engine con BK: Retarder con The line at the bo ttom of the character display shows the system wh