Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE REPLACE ELEMENT WARNING 1. Stop the engine. 2. Remove 6 hooks (5) from dust cap (4), then cap. both hands, and move it up and 4 - 24 Whe n pulling out the air cleaner e lement, make sure that you are standing on a firm place. If your footi ng is not secure when you carry out the operation, there is d anger of falling and suffering i njur the dust 3. down and to the left and r 4. Hold inner element (7) so that it does not come out, a nd c lean the inside of the air clean er body with a dry cloth. 5. Use a dry cloth or compre ssed air to clean off the dir t stuck to dust cup (4) and vacuator valve (8). 6.

Check that there are no c racks in the lip of the vacuator valve (8). If any cracks are fou nd, replace with a new part. 7. Pull out inner element (7) and install a new inner elemen 8. Install outer element (6) i