. MAINTENANCE SERVICE PROCEDURE ADJUST PARKING BRAKE WARNING parking brake switch. (1) and turn 4 - 37 To prevent the parking brake from being aut omatically applie d during the adjustment operation , raise the brake oil pressure high level and han g a warnin g notice t hat can be seen clearly to prevent any oth er person from operating the Never put any oil or grease on the surface of the pad o If the parking br ake effect is poor, adjust a s follows he brake oil pressure caut ion lamp is turn ed OFF ccumulator pressure is suf ficiently high), a nd then parking brake. he lock portion of parking brake adjustme nt screw it counterclockwise to bring the pad into tight the disc.
he lock portion of parking brake adjustme nt screw it back clockwise 240±15° (2/3 turns). Measure the thic kness of the pad, and if it is less tha n 1.5 m m (0.06 in), contact your Komatsu distributor to ha ve it replaced. When carrying out the first adjustment a fter replacing t he pad, push down the l ock portion of adjustment s crew (1) and tur n it back clockwise 360 ± 15° (1 turn). After adjusting, See "CHECK check the brakin g capacit y of the parkin g brake. BRAKING CAPACITY O F PARKING BRAKE (PAGE 4-50)". If the machine moves, contact your Komatsu spection. omatsu distributor for in