. MAINTENANCE SERVICE PROCEDURE CHECK LEVEL OF BATTERY ELECTROLYTE Carry out this procedure before operating the machine. WARNING the 4 - 44 Do not use the battery if the bat tery electrolyte level is below the LOWE R LEVEL line. This will accelerate deterioration of inside of the battery and reduce the service life of the battery. In additio n, it m ay cause an expl osion. ks near the battery. The battery generates flammabl e gas and there is danger of explosion, do no t bring fire or spar ks near the battery. Battery electrolyte is dangerous . If it gets in your eyes or on your skin, wash i t off with a large a mount of water a nd cons doctor.
When adding distilled water to the battery, do not allow the battery electrolyte to go above the UPPER LEVEL line. If ay leak and cause damage to the paint surface or corrode other parts. electrolyte level is too high, it m ay leak and cause damage to the paint surfac e or corrode othe NOTICE If there is a fear that the battery wate r may freeze after refilling with purified w ater ( e.g. commercially available replenishment w for a battery), do the replenishmen t before the day's work on the next day. Inspect the battery electrolyte l evel at least once a month and follo w the basic safety pr ocedures given below. WHEN CHECKING ELECTROLYTE LEVEL FROM SIDE OF BATTERY ttery, check as follows.
If it is possible to check the ele ctrolyte level from the side of the ba ttery , check as follow 1. Use a wet cloth to clean the area around the electrolyte level lines and check that the electrolyte level is between the UPPER LEVEL (U.L.) and LOWER LEVEL (L.L.) lines. If the battery is wiped with a dry cloth, static electricity may cause a fire or explosion. e area around the electrolyte level REMARK If distilled water is added to ab ove the U.L. line, use a syringe to lower the level to the U.L. line. Neutralize the removed fluid with baking soda (sodium bicarbon ate), then flush it away with a large amount of water or consult y maker. our Komatsu distributor or battery