Komatsu — EVERY 250 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK BRAKING CAPACITY OF FOOT BRAKE WARNING the and for CHECK BRAKING CAPACITY OF RETARDER BRAKE WARNING the If NOTICE other position. 4 - 49 If the machine mo ves when the braking capacit y is being checked, it m ay lead to serious personal injury. If the machine moves, lower the engine s peed immediately, return the gear shift lever to the N (Neutral) position and set th e parking brake switch to the PARKING position Check the braki ng capacity of the foot bra ke as follows. 1. Stop the ma 2. Set gear sh engine spee engine spee 3. Lower the e then set par If any abnor repair. 1.

Stop the ma chine on flat ground and de press service brake ift lever (2) to the D posit d. If the machine does n d reaches 1440 rpm, it is ion, gradually raise ot move even when normal. ngine speed, set shifting lever at N position, king brake at PARKING position. mality is found, ask your Komatsu distributor NOTICE There is danger of damage inside the transmiss ion, so always do this with the gear shift lever at the "D" position. Do not u se any other position. If the machine mo ves when the braking capacit y is being checked, it m ay lead to serious personal injury.

If the machine moves, lower the engine s peed immediately, return the gear shift lever to the N (Neutral) position and dep ress the foot brake. Check the braki ng capacity of the retarder brake as follows. 1. Stop the ma (1) fully. 2. Set gear sh engine spee engine spee 3. Lower the e any problem chine on flat ground and pull retarder control le ift lever (2) to the D posit d. If the machine does n ion, gradually ot move even raise when d reaches 1440 rpm, it is ngine speed, set gear shi normal. ft lever at N positio is found, ask your Komat su distributor for rep There is danger of damage inside the transmiss ion, so always do this with the gear shift lever at the "D" position.

Do not u se any