. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE Rear REPLACE HYDRAULIC FILTER ELEMENT WARNING engine is stopped, and may cause burns. Wait for the 4 - 72 The temperatur temperature to go down b efore starting the work When r emoving th e oil fille r cap , tur n it slowly to release the i nterna 1. Remove bolt (1 ), then remove cover (2). 2. Turn the cap of oil f iller (F) slowly 3. pressure, Remove then bolts ( remov 3), the e the cap n remove 4. Take out the el ement, then was h the i nside of the case and the removed parts. element, then install cover (4) with bolts (3). with bolts (1). 5. Instal l the new elemen t, then in stall c over (4) with bolts (3). 6.
Instal l cover (2) with b olts ( 1). elease the internal