. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN HYDRAULIC TANK WARNING is stopped, and may cause burns. Wait for the IN HYDRAULIC TANK, ADD OIL (PAGE 3-74)". CHECK WATER PUMP Check around the water pump for water leakage. If any part is leaking, ask your Komatsu distributor for inspection/repair. 4 - 77 EVERY 4000 HOURS SERVI Maintenance for every 50, 250, 50 0, 1000 and 2000 hours service should be carried out a t the same time. temperature to go down before starti When remov ing the oil filler cap, turn it slowly to releas e the intern the engine Refill capac ity: 120 liters (31.70 1. Lower the dump body and stop 2. Turn the cap of oil filler (F) to moving the cap.
re not to get any oil o before re 3. Taking ca drain the oil, then tighten the pl 4. Pour in th e specified amount of engine oil from o il filler (F). 5. After addi ng oil, check that the oil is at the specified level. details of the oil to use, s ee "CHECK OI CHECK STARTING MOTOR The brushes m ay be worn or the be aring may have ru n ou t o f grease , contact your Komatsu distributor for inspection and repairs. s started frequently, have this inspection carried out every 1000 hours.
If the engine i s started frequently, h ave this inspecti on carried out CHECK AIR COMPRESSOR Ask your Kom atsu distributor to car CHECK FAN PULLEY AND TENSION PULLEY Check for play of the pulley and leak age of grease. If any proble m is found, please contact y our Komatsu distributor.