. OPERATION EXPLANATION OF COMPONENTS ACTION CODE DISPLAY CAUTION E03: When this code is displayed, stop the machine immediately, check the failure code, and contact your Komatsu distributor for repairs. REMARK The top line of the character display displays "E03" and the bottom line displays "CHECK RIGHT NOW" and "CALL" in turn for 3 seconds each. On the right side of the "CALL" display, a telephone number is displayed. If no telephone number has been set, this space is blank. For details of the method of setting the telephone number, see "INPUT METHOD FOR TELEPHONE NUMBER (PAGE 3-28)". E02:
If an overrun related display is given, reduce the engine speed and machine speed while continuing operations. If an overheat related display is given, stop the machine and run at the engine under no load at a mid-range speed. If the same action code is displayed even when the above action is taken, check the failure code and ask your Komatsu distributor to carry out repairs. REMARK The top line of the character display displays "E02" and the bottom line displays the condition of the machine related to overrun or overheat. 3 - 9 When action code E03 is displayed on the character display, stop the machine im mediate ly.
Then check "ACTION CODE (PAGE 3-140)" and ask your Komatsu distri If the machine has failed, or if t here has been excessive load on the machin e, or if it is necessary to car ry out der of inspection and maintenance, an action code is displayed on this panel ( 4) to re commen d suitable action. If more than one failure occurs at the same time, the most importan t action code is displaye d. T he or importance, starting from the hig hest, is E03, E02, and E01. If failures of equal i mportan ce occur a t the same time, the latest one is displayed. When action codes E02 or E03 occur, the alarm buzzer sounds intermittently a nd the c entra l warning lamp lights up.