. OPERATION EXPLANATION OF COMPONENTS then carry out inspection. 3 - 17 ENGINE OIL PRESSURE CAUTIO This lamp (6) lights up to lubricating oil pressure has d When it lights up, "E03 CHEC K RIGHT NOW" is displayed on the character display and the eng ine output is automatically restricted. Move the machine immediat This lamp lights up if the oil pressure goes below the specified pressure when the engine is running. This lamp does not light up if the engine is not running. BRAKE OIL PRESSURE CAUTIO N LAMP brake oil pressure goes below the the central warning lamp and alarm mains below the specified pressure This lamp (7) lights up if the specified pressure.
When the engine is stopped, buzzer do not function. If the brake oil pressure re If when 30 seconds has passe d since the engine was started, "E03 CHECK RIGHT NOW" is dis played on the character display, so move the machine immediat ely to a safe place, stop the engine, then carry out inspection. TILT CAUTION LAMP This lamp (8) lights up whe n the dump lever is at the RAISE machine is tilted beyond the stability position and the rear of the limit on the left or right side. Lower the dump body and move the machine to a safe horizontal place. MACHINE MONITOR, OPTION SY STEM CAUTION LAMP a problem has been detected in the stem for an installed option.
This lamp (9) lights up when machine monitor or in the sy "E03 CHECK RIGHT NOW" i s displayed on the character display, so move the machine immedi ately to a safe place, stop the engine, then carry out inspection.