. OPERATION EXPLANATION OF COMPONENTS 3. Press the ( ‘ ) of machine monitor mode selector switch 1. It will change to the display in the diagram on the right. The bottom line shows two items: the replacement time on the left and the total number of times the item has been replaced on the right. 4. Press the (>) or ( switch 2 to display the item to be reset. 3 - 27 RESET METHOD FOR FILTER, OIL REPLACEMENT TIME The filter and oil replacement ti me is displayed on the character display, so if the f ilter a nd oil hav e been replaced, reset the filter and oil change ti 1. Press the () of machine monitor mode selector switch 1, and displ 2. Press (>) or ( 1.
Press the () of machine monitor mode selector switch 1, and displ ay the reverse t ravel in o dometer 2. Press (>) or ( 5. When the item to be reset is displayed, press the () portion elector switch 1 to give the display e right. ET" and the "item to be reset" in ement time, press (>) or ( of machine monitor mode s shown in the diagram on th The top line displays "RES turn. 6. When resetting the replac machine monitor mode sel "YES", then press () of switch 1. It will reset and r To abandon, align the cur machine monitor mode sel 7. When resetting the replace ment time for another item, carry out the procedur e from Step 4.
After completing, press () of machine monit or mode selector switch 1 twice or turn th e starting switc h OFF.