Komatsu — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS it EMERGENCY STEERING SWITCH WARNING the pilot lamp on the machine monitor light up. to a maximum of 5 km/h (3.1 MPH). 3 - 33 POWER MODE SELECTOR SWI TCH itch the power mode. This makes ally in a way suited to the operatin This switch (5) is used to sw possible to travel economic conditions. If portion (a) of the switch is pressed, high-power mode pilot lam (P) lights up and the system is switched to the high-power mode If portion (b) of the switch is p ressed, economy mode pilot lamp (E lights up and the system is s witched to the economy mode. (a): High power mode (gene ral operations) ng conditions ons on flat ground) Normal standard operati (b):

Economy mode (operati Work with emphasis on f ground where the maxim uel consumption, such as work on fla um power is not needed When the lamp switch is tur ned ON, the icon inside the switch lig hts up, regardless of th Do not continue to use the emer gency steering pump for more than 90 se conds. If the emergency s teering is used continuously for more than 90 seconds, there is danger that the pump may burn out o r be damaged, or that it m ay cause a fire. This switch (6) is used to act uate the emergency steering pump. When the switch is pressed , the emergency pump is actuated t he steering.

make it possible to operate t When the switch is ON, the pilot lamp (red) inside the switch an When the emergency steerin g is being used, keep the travel spee The emergency steering is a ctuated automatically in the followin When the steering hydra When the engine has sto When the emergency steeri ng is actuated, stop the machine promptly and perform insp If the starting switch is at the ON position and the parking brake s witch is at the TRAVEL position when the engine is stopped, the automatic e PARKING position. mergency steering is actuated after 1 second, so set the parking brake switch to the