. OPERATION OPERATION TRANSMISSION CUT-OFF FUNCTION CUT-OFF 3 - 121 When the t ransmissio n cut-off switch is tur ned ON, the pilot lamp lights up an d the follow ing transmission cut- off function is actuated. Position (a Position (b When the l eft brake pe dal is depressed, the brake is actuated , and in addition, the transmi ssion is shifted to ne utral at the pre-selected brake peda l depressio REMARK -off function is actuated only with the left brake pedal. The cut -off function is actuated only wit h the left brake pe When t he transmis sion cut-off switch is at the OFF positio n, the left brake pedal works in th right bra ke pedal.
ting the brake pedal depression position, see "ADJUSTING TRANSM 3-122)". For det ails of adjus POSITI ON (PAGE Raise o r lower the pre-selected brake p edal depression p osition to a djust the cut-off to mat shown below. arrying out When c edal depress ion position for the cut-off (tr ansmission shifte d to neutral). In this setti ng, the transmission driving force is cu t at a point wh machine ere there is from slippi When a pproaching d ump trucks during lo ading operations, raise the brak e pedal dep ression position for t he cut-off (transmission shifted t o neutral).
I n this setting, the fin e control of the br aking immedia tely before dumping the load can be carried out wit h the brake o nly, so this makes it easy to ght to a soft stop. control and allows the machine to be brou