. OPERATION TROUBLESHOOTING OPERATION TROUBLESHOOTING wire rope to the part the arrow in the 3 - 154 diagram at indicated with WHEN ENGINE CAN BE USED If the tran smission and steering be machine o ut of mud or to move i t for a short distance to The opera tor should sit on the m achin e being t owed an d operate the steering in the di rection that the machine is WHEN ENGINE CANNOT BE USED stopped, use the following procedure. When towing a machine w ith the e ngine stopped, use the 1. 2. 3. 4. 1. The trans mission oil d oes not lu bricate the system, so re move t he front and rear drive sh afts. If necessary, block the tires t o prevent the machin e from moving. the steering cylinder. 2.
The stee ring cannot b e operate d, so remove the steer Even if th e brakes are in good condition, the brakes c an only be used a limited numb er of times. There is no change i n the operating force for the brake pedal, but the braking force is reduced each time the pedal is d. depresse 3. Connect t he towing eq uipment securely. Whe n carryin g out towing operations, use two machines of at least the same cla ss as the ma chine bein g towed. Connect one machine each to the front and r ear of the machine being towed, th en remove th e blocks from t he tires and tow t 4. Parking b The park ing brake ca nnont be turned OFF. T o releas e the parking brake, do as follo