. OPERATION EXPLANATION OF COMPONENTS TRANSMISSION CUT-OFF SWITCH WARNING same time, sets the TRANSMISSION CUT-OFF SET SWITCH CAUTION 3 - 39 When moving the machine off on an uphill s lope, set the tr ansmission cut-off switch to t he OFF positio n, depress th e accelerator pedal while keepin g the left brake pedal dep ressed, then gr aduall y release the brake pedal a nd allow th e machine to move. In this way the machine c an be prevented from tra veling backwards. Press this switc system. h (4) to turn on and off the transmission cut-off When the switch is pressed, the pilot la mp lights up a nd th e system is turned ON.
Th e transmission is shift ed to neutral at the adjusted brake pedal dep ression position. osition. Normally, keep t he switch at the ON p For details of th "ADJUSTING T e method of adjustin g the cut-off position, see RANSMISSION CUT -OFF POSITION 3-122)" in the ST Position (a): OFF The left brake pedal acts in the same way a s the normal brake (right brake Position (b): ON The tran smission to neutral. the normal REMARK The brake pedal position where the cut -off system is actuated can be adjusted by using the transmissio n cut-off set switch on the rig ht switch panel.
Apply the parking brake before adjusting th e transmissio n cut-o Turn this switch ( 5) ON to adjust the bra ke pedal position w here the transmission is a utomatically shifted to Position (a): ON Cut -off position can be ad When the switch is released, it automa tically return s to its original position. For details of th "ADJUSTING T e method of adjustin g the cut-off position, see RANSMISSION CUT -OFF POSITION 3-122)" in the ST OPPING MACHINE s