PRECAUTIONS FOR THE REMOVAL 2.7 PRECAUTIONS FOR THE REMOVAL The draw hook must be used only for the first aid and not for towing the machine. Before moving the machine, make sure that all the controls are in neutral. Incorrect manoeuvres may result in serious injuries or even death. To move the machine, use properly dimensioned steel cables; do not use worn cables or cables with broken strands (A), twist- ed cables (B), deformed cables (C). During the removal, no one can be allowed to get near the ma- chines or the cable. Do not get astride the cable. RYA00820 F= 1665 kg (for canopy) F= 1790 kg (for cabin) Use cables having the same length and draw continuosly and constantly, without jerks.
Arrange and couple the machine to be removed by posi- tioning it on the same axis as the towing vehicle; the draw- ing force must be parallel to the axis of movement of the machine. 43 • Remove the machine only as much as necessary to permit the required repairs. • Put wooden blocks between the towing cable and the machine body, in order to avoid wear or damage. • Do not remove the machine in any way other than that indicated at point "3.7.3 TOWING THE MACHINE". CAUTION • The maximum applicable force for the removal is the fol- lowing: RYA00810 CAUTION