DETAILED CONTROLS AND GAUGES 2. Travel Speed Selector Switch When loading or unloading from a trailer, always travel at low speed. Never operate the travel speed se- lector switch during the loading or unloading operation. If the travel speed is switched between Hi and Lo when the machine is traveling, the machine may devi- ate to one side, even when traveling in a straight line. Stop the machine before switching the travel speed. Use this switch (2) to switch the travel speed to low speed or high speed. Each time the switch is pressed, it is switched between low speed and high speed. When the machine is traveling at high speed, the travel speed boost monitor lights up.
NOTE When the engine is started, the travel speed is automatically set to low speed. When traveling at high speed, if the machine travels on soft ground or up a slope and the load increases, the travel is au- tomatically switched to low speed travel, so there is no need to operate the switch. The travel speed boost monitor dis- plays stays lighted up. When the load is reduced, the travel system returns to high speed travel. 63 WARNING