DETAILED CONTROLS AND GAUGES 3.2.8 CAPS AND COVERS WITH LOCK Opening and closing covers with lock Use the ignition key to open and close the caps and covers with lock. For details on the position of the caps and covers with lock, see "3.3.17 LOCKING". Insert the key completely (6 mm from the point where the key narrows), then turn it. If the key is turned when it is inserted only partially into the lock, it may break. OPENING AND CLOSING CAPS WITH LOCK Opening 1 - Insert the key in the lock. 2 - Turn the key clockwise then open the cap. Closing 1 - Tighten the cap thoroughly, then insert the key in the lock. 2 - Turn the key counterclockwise and then extract it.
OPENING AND CLOSING COVERS WITH LOCK Opening 1 - Insert the key in the lock. 2 - Turn the key counterclockwise and open the cover by pul- ling the grip. Closing 1 - Close the cover and insert the key in the lock. 2 - Turn the key clockwise and then extract it. 80