D 2008/2009 Electrical system W 13-02-03 Removing and installing the generator Commercial available tools: – V-belt tension measuring device . . . . . . . . . . . . . . . . . . . . . . . 8115 Attention! Only test / tighten / renew V-belts when the engine is not running. The V-belt tension of new V-belts must be checked after they have been running for 15 minutes. 6 Removing the generator z Disconnect the battery's negative terminal. z Remove cable from generator. © 41135-1 z Loosen screws (1). z Unscrew screws (2). z Remove V-belt. z Press generator in direction of arrow. 2 1 1 © 41180-0 © 02/2006 6025-001 1/4