User notes 3.5 Explanation of symbols Danger! of death or to health. Must be observed! For example: The incorrect use or conver- sion of the turbocharger can lead to serious injury. Caution! Danger to the component/engine. Non- compliance can lead to destruction of the component/engine. Must be observed! Note General notes on assembly, environmental protection etc. No potential danger for man or machine. Tool Conventional and special tools required for the work. Auxiliary materials Working materials required in addition to the tools for performing the work (e.g. greases, oils, adhesives, sealants) References to important documents or job cards for the work process. For example:
Job card W 04-05-05 Reference to a document or a job card within the work process. Test and setting data The necessary values are specified here. If several values are necessary, a cross re- ference is given to the Test and Setting Va- lues table. For example: ID no. P01 61 = valve clearance, inlet Tightening specification The necessary values are specified here. If several values are necessary, a cross re- ference is given to the Tightening Specifi- cations table. For example: ID no. A01 001 = cylinder head screws 3 © 12/2005 5983-001 6/6