D 2008/2009 Drive system W 02-02-04 Renewing the crankshaft sealing ring (opposite side to flywheel) Commercial available tools: – Pricker. . . . . . . . . . . . . . . . . . . . . . . 8198 – Assembly lever . . . . . . . . . . . . . . . . 9017 – W 12-02-02 Special tools: – Assembly tool . . . . . . . . . . . . . . . 142790 – Self-tapping screw – Washer 6 Removing the crankshaft sealing ring z Remove V-belt pulley. W 12-02-02 z Make a hole of approximately 3 mm in the crankshaft sealing ring with a pricker. Attention! Do not damage the gearcase cover and crankshaft. © 41174-0 z Turn in a self-tapping screw with washer. z Pull out the crankshaft sealing ring with assembly le- ver.
z Visually inspect all running surfaces. © 41173-0 © 02/2006 6000-001 1/2