OM7001 Optional Equipment - Section 7 Cab Radio Page 7-1 FIGURE 7-1. CAB RADIO SETTING THE TIME GENERAL RECEIVER FUNCTIONS 1. Turn the key switch "ON". The receiver is equipped with two FM radio bands, FM1 and FM2. The two bands are identical, however, each one allows the operator to set 6 preset channels for a total of 12 FM presets overall. 2. Press and hold DSPL/TM SET (9) for 2 sec- onds. When the number display flashes, time set mode is active. 3. Press TUNE / SEEK (7 & 8) to change the hour setting. TURNING THE POWER "ON" AND "OFF" 4. Press the DSPL/TM button to switch to minutes. The minute digits will flash when in this mode. 1. Turn the key switch to "ON". 2.
Press PWR (1) to turn the receiver "ON" and "OFF". Pushing ON/AUDIO (6) may also be used to turn the receiver power "ON". 5. Press TUNE / SEEK to change the minute set- ting. After 5 seconds of inactivity has elapsed, the display will return to the default mode. The clock will now display the correct time of day. DISPLAY With the receiver "OFF", the clock will be displayed. Momentarily pressing DSP/TM SET (9) with the receiver "ON" will allow the operator to toggle between displays. When the receiver is in AM, FM1, FM2, or WX, the display will toggle between the frequency and the clock.