Safety - Section 20 OM2034 Page 20-4 General Safety PRECAUTIONS WHEN USING ROPS If ROPS is installed, the ROPS must never be removed when operating the machine. The ROPS is installed to protect the operator if the machine should roll over. It is designed not only to support the load if the machine should roll over, but also to absorb the impact energy. The ROPS installed on equipment manufactured and designed by Komatsu fulfills all of the regulations and standards for all countries, but if it is modified or repaired without authorization from Komatsu or is damaged when the machine rolls over, the strength will drop and it will not be able to fulfill its function properly.
It can only display its performance if it is repaired or modified in the specified way. When modifying or repairing the ROPS, always consult the authorized regional Komatsu distributor. Even if the ROPS is installed, it cannot show its full effect if the operator does not fasten the seat belt properly. Always fasten the seat belt when operating. PRECAUTIONS FOR ATTACHMENTS When installing and using optional equipment, read the instruction manual for the attachment and the information related to attachments in this manual. Do not use attachments that are not authorized by Komatsu or the authorized regional Komatsu distributor.
Use of unauthorized attachments could create a safety problem and adversely affect the proper operation and useful life of the machine. Any injuries, accidents, and product failures resulting from the use of unauthorized attachments will not be the responsibility of Komatsu, or the authorized regional Komatsu Mining Systems, Inc. distributor. PRECAUTIONS ON STARTING MACHINE START THE ENGINE FROM THE OPERATOR’S SEAT ONLY. NEVER ATTEMPT TO START THE ENGINE BY SHORTING ACROSS THE STARTER TERMINALS. This may cause fire, or serious injury or death to anyone in machine’s path.