Wiper combination switch (with rain sensor) When the system senses the rain, the keyless start / stop button is in "run" and the wiper switch is in "auto" position, the windshield wiper will be turned on automatically, and the wiper speed will be changed according to the rainfall. When the wiper control lever is in the "Lo" (low speed wipe) or "Hi" (high speed wipe) position, the front wiper will wipe at the set speed, and the auto sensing function will not work at this time. Warning not place the wiper control lever in the "auto" position when washing the car with the automatic car washer, otherwise the wiper may be damaged. Turn off the system when the wipers are not required.
The automatic wiping speed of the system can be adjusted by turning the automatic wiping sensitivity adjusting knob. The sensitivity is divided into four levels. Rotate the knob up to the highest level 4 (the fastest), rotate the knob down to the lowest level 1 (the slowest), and the order of the middle position is level 2 and level 3. Adjust the speed of the automatic wiper to meet your driving habits. ① MIST Single wiper ② OFF Stop ③ INT Intermittent wiper ④ LO Low speed wiper ⑤ HI High speed wiper ⑥ Automatic wiper sensitivity adjustment knob 102