Seat ●After the seat position is adjusted, try to move the seat cushion and backrest forward and backward to ensure the seat is locked reliably. Warning Proper seat adjustment ensures that the seatbelt and airbag system are fully protected. Danger is forbidden to adjust the driver's seat in the process of driving, so as to prevent the driver from losing control of the vehicle due to the movement of the seat, resulting in serious accidents. not place items under the manually adjusted seat, otherwise these items may accidentally push the seat adjustment lever upward, and the seat will suddenly move, causing the vehicle to lose control during driving.
Objects placed under the driver's seat may also hinder the operation of the brake pedal, leading to serious accidents. ●When adjusting the seat, pay attention to the personnel or objects behind the seat to avoid personal injury or damage. Notice ●When measuring the depth of the seat cushion, the seat position is the design position: the backrest angle is 25 °, and the front and rear positions are to adjust the seat to the last position, and then slide the seat forward for 20 mm. ●Front row: the maximum adjustment angle of the seat back is (76 ± 4) ° and it can be turned forward (24 ± 2) ° and backward (52 ± 2) ° at the design position. ●Rear row:
the rear row is an integral backrest with an angle of (28 ± 2) ° and cannot be turned over. Seat adjustment: Pull up the adjusting rod ① under the front of the seat and move the seat back and forth to a proper position; release the adjusting rod ① and move the seat back and forth slightly until the seat is locked reliably. Seat cushion adjustment *: Pull up the adjusting handle ② to raise the seat cushion; Pull down the adjusting handle ② to lower the seat cushion. Driver's seat manual adjustment 108