Start / stop button ●When the key is not pressed: the start / stop key is off, which means "off" mode (the key backlight is not on); ●When pressing the key for the first time: turn on the "run" mode (the key background light is green), the instrument will be on, and all the electrical equipment will be in the on state; ●The second time you press the button, turn on the "ACC" mode (the button background light is red), and connect the radio, cigarette lighter and other accessories. ●The third time you press the button: return to "OFF" mode (the button background lights out). Press the start / stop button one by one to switch in three modes: "off" "run" →"ACC".
Note ●Automatic transmission model: the shift lever is in P or n gear and the brake pedal must be pressed to start the engine. ●Manual transmission model: the clutch pedal must be pressed to start the engine. For safety reasons, it is strongly recommended to put the shift lever in the neutral position before starting the engine. ●Press the start / stop button to switch the engine start or power mode, but it must be ensured that the smart key is placed in the effective area that can be detected by the vehicle. The start / stop button is located on the dashboard to the right of the steering wheel. Power mode switching Automatic transmission model:
put the shift lever in P or n position, when the brake pedal is not pressed; manual transmission model: when the clutch pedal is not pressed; press the start / stop button, the power mode will be switched in the following order: 136