7.Brake system failure If you find that the braking distance suddenly becomes longer or the brake pedal stroke becomes longer, there is a possibility that the brake system is faulty. The driving style should be adjusted while ensuring safety, and the brake pedal should be applied with greater force during braking, and travel at a low speed to the nearest Beijing car dealership. Brake wear indicator * Brake system fault warning lamp The brake pad is equipped with a wear sound reminder.
If the squeal or scratch is heard when stepping on the brake during driving (this is different from the brake squeeze, which is usually caused by the dust on the brake surface when braking slightly), it indicates that the brake pad needs to be replaced. is on during driving, it indicates that there is a fault in the brake system. At this time, it is necessary to check the brake fluid level. If the brake fluid level is normal, there are other faults in the brake system. At this time, it is necessary to pull over the side of the car immediately to ensure safety, and contact BAIC dealer for inspection and maintenance.
If the brake system fault alarm lamp Danger hen the vehicle completely loses the brake, do not drive forcibly. At this time, pull over safely and contact the special BAIC dealer ot wait ofr rescue. 8.Brake overheating Do not put your foot on the brake pedal when you do not need to brake, but make the brake "slip", which will cause the brake to overheat, reduce the braking efficiency, extend the braking distance and increase the wear of the brake pad and brake disc. Hydraulic brake system The hydraulic brake system transmits hydraulic pressure to the brake through two circuits. If one of the circuits fails, the other circuit will continue to operate.
At this time, it is necessary to drive to the nearest BAIC dealer for maintenance at a low speed under the condition of ensuring safety. In this case, more force should be applied to the pedal. 150